The Reaper is a 60 x 60 super plush water absorbing soft thick pile drying towel that is safe to use on all paint surfaces. An unforgiving drying towel that eradicates the unholy water from your car or bike!

The Reaper – H20 won’t know what’s hit it!

How to use

Simply place The Reaper onto your panel, pat dry (or wipe gently) and send water into the 1000GSM ultra plush afterlife!

Important Information

Care Instructions

Your Reaper will be going through some serious work with drying after drying after drying. Its important that you need to look after your Reaper the right way. Washing your Reaper with the correct detergent that has no fabric softner in is imperative, if you dont your Reaper wont perform as it should. Using the incorrect detergent on your towels will cause the towels not to absorb any water, the towel will ‘push’ the water off the car as opposed to absorbing the water.

Machine wash your Reaper using Clean Towels towel detergent at approx 30-60ml per wash (30ml low to 60ml high soiling levels). Machine dry at low heat or air dry, fluff up your Reaper to its full exorcising best!

The post Hellshine – The Reaper – Super Plush Drying Towel appeared first on Team HARD Racing.

The post The ultimate car care kit courtesy of Autobrite Direct. appeared first on Team HARD Racing.

Usage:

• Ensure the panel is clean and dry before application
• Ideally apply a pre-wax paint cleanser for best adhesion and results
• Apply sparingly using a ‘Blendz foam wax applicator’
• Apply a thin layer of wax in tight circular motions, then in straight lines to ensure even coverage
• Allow to cure for around 10-15 minutes.
• Use a ‘Guv’Nor’ or ‘Mini Reaper’ buffing towel to buff away the cured wax (turning frequently)
• Use a QD such as Berry Blast to assist buffing if required.
• Leave the car for approx. 1-2 hours before applying additional layers

Durability: 4-5 Weeks (Single layer) 5-7 Weeks (Double layer)

Tub Size: 150ml

Applications per tub: 40-45 full cars (depending on vehicle size)

The post HARD Wax Green appeared first on Team HARD Racing.

The post Jelly Bean Air Freshener appeared first on Team HARD Racing.

Usage:

• Ensure the panel is clean and dry before application
• Ideally apply a pre-wax paint cleanser for best adhesion and results
• Apply sparingly using a ‘Blendz foam wax applicator’
• Apply a thin layer of wax in tight circular motions, then in straight lines to ensure even coverage
• Allow to cure for around 10-15 minutes.
• Use a ‘Guv’Nor’ or ‘Mini Reaper’ buffing towel to buff away the cured wax (turning frequently)
• Use a QD such as Berry Blast to assist buffing if required.
• Leave the car for approx. 1-2 hours before applying additional layers

Durability: 4-5 Weeks (Single layer) 5-7 Weeks (Double layer)

Tub Size: 150ml

Applications per tub: 40-45 full cars (depending on vehicle size)

The post HARD Wax Pink appeared first on Team HARD Racing.